4140 Alloy Steel Data Sheet. 4140 is an alloy steel that is supplied in either the annealed or prehardened condition. The prehardened condition is heat treated to a medium hardness (HRC 28/32) and is designated as 4140 HT. 4140 annealed is supplied in the soft condition and can be hardened to RC 54. 4140 annealed is designated as 4140 Ann or
General characteristics of 4140 Alloy Steel. AISI or SAE 4130 grade is a low-alloy steel containing chromium and molybdenum as strengthening agents. Its chemical composition is as follows. AISI/SAE 4140 grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength.
AISI 4140 Steel Bar, Steel Plate, Flats Supplier, Stockist and Exporter. AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications.
4140HW Alloy Steel Technical Data Hardness See Figure 1 Tensile See Figure 2 and Figure 3 Charpy V-notch Impact See Figure 5 and Figure 6 Heat Treatment Figure 9 (Mechanical Properties for 4140 and 4140HW) The data represents a mechanical property comparison of …
4140 - Cf Annealed Round Rod 4140 Cold Finish Annealed Round Rod/Bars, also referred to as Chromoly Steel, is the most versatile Cold Rolled Steel. It offers resistance to fracturing in high stress application and when hardened, resists abrasion, and impact resistance.
4140 Heat Treated is a chromium-molybendium alloy steel. 4140 HT is the most commonly used high tensile steel with endless applications including everything from gears and pumps to various applications in the automotive and construction industry. 4140 HT has a medium hardness of 28/32 HRC.
4140 high tensile steel 4140 is a 1% chromium - molybdenum medium hardenability general purpose high tensile steel - generally supplied hardened and tempered in the tensile range of 850 - 1000 Mpa (condition T).4140 is now available with improved
Brinell v Rockwell Conversion | Associated Steel Corporation
** This conversion calculator gives approximate hardness values for various hardness scales based on the Rockwell “C” Scale. The Hardness Tensile Strength relations may vary according to the processing history or the chemical composition of the steel.
HIGH TENSILE STEEL – AISI 4140 AISI 4140 Chrome - Moly High Tensile Steel, generally supplied hardened and tempered to Condition “T” in sections up to 100mm, with a tensile strength of 850 – 1000 MPa and aiming for this strength range in larger sections. It offers a very good balance of strength, toughness and wear-resistance.
4140 Steel General Information. 4140 alloy steel is a low alloy steel that contains chromium, molybdenum, and manganese. Because it contains chromium and molybdenum, it is sometimes referred to as chromoly steel.
4140 steel is a low alloy steel commonly used in structural members and mechanical components. It is composed of Chromium, Manganese, Carbon, Silicon, Molybdenum, Sulfur and Phosphorus submerged in a matrix of Iron.
4140 Chromium-Molybdenum Steel. Supplied in the annealed or prehardened condition. 4140 PREHARD is heat treated to a medium hardness (HRC 28/32) and is designated as 4140 HT. 4140 annealed is supplied in the soft condition and can be hardened to RC 40.
4140 steel hardness chart. AISI 4140 is a chromium molybdenum alloy steel specification widely used in the oil and gas industry. Similar to grade AISI 4130. but with a slightly higher carbon content. The higher carbon content of AISI 4140 gives greater strength and heat treatment capabilities.
Speedy Metals Information for 4140 Annealed Cold Roll Steel
4140 cold finished annealed is a chromium-molybdenun alloy steel that can be oil hardened to relatively high hardenability. The chromium content provides good hardness penetration, and the molybdenum imparts uniformity of hardness and high strength.
15 Common Applications for Versatile 4140 Steel - Otai
AISI 4140 steel grade is a versatile steel grade. 4140 material is widely used in a lots of industrial fields. It is a chromium-molybdenum alloy steel. The chromium content provides good hardness penetration, and the molybdenum content ensures uniform hardness and high strength.
Heat Treatment of SAE/AISI 4140 Alloy Steel 4140 Steel Annealing Slowly heat to 800～8500 ºC, keep enough time, ensure heat thoroughly. then cooling in furnace to 480 ºC , then cool in air. After annealing, the hardness 92 HBS Max. AISI 4140 Steel Hardening & Quenching 4140 Steel is usually used at 18-22 HRc, If needs, AISI 4140 alloy steel
1045 vs 4140 Steel Comparison | Capital Steel & Wire
4140 steel is chromium, molybdenum, manganese steel with good toughness, impact resistance and fatigue strength. 1045 has slightly increased tensile strength and yield strength numbers than 1045 as a result of a slightly higher carbon content.
4140 Steel Plate | Precision Grinding, Inc. Due to it’s good hardness penetration and uniformity flame hardening, induction hardening, or oil hardening can considerably increase the wear resistance of 4140 steel. 4140 PH has the same industry standard chemistry as 4140 plate HR plate but with an industry standard Rockwell C Hardness rating of …
AISI 4140 and 4150 is a medium carbon, chromium-molybdenum alloy steel. This steel is offered in a wide range of conditions including but not limited to: cold drawn annealed, hot roll heat treated, heat treated turned ground and polished.
4140 High Tensile Steel | Interlloy | Engineering Steels
4140 is a 1% chromium - molybdenum medium hardenability general purpose high tensile steel - generally supplied hardened and tempered in the tensile range of 850 - 1000 Mpa (condition T).4140 is now available with improved machinability, which greatly increases feeds and/or speeds, while also extending tool life without adversley affecting mechanical properties.
LSS™ 4140 and 4142HT Alloy Steels. LSS 4140 and 4142HT are versatile, alloy steels that are used in a variety of tooling and other industrial applications. LSS 4140 is the classic AISI 4140 alloy steel that is sold in the annealed condition at a hardness less than or equal to 217 HBW.
4140 Tool Steel Grade Shapes, Sizes, and Technical Information From Tool Steel Service Inc. AISI 4140 is an alloy steel that is supplied in either annealed or prehardened condition. The alloy steel is composed of chromium, molybdenum, manganese containing low alloy steel.
4140 CF Annealed Alro stocks 4140 CFA -a steel in the family of SAE steel grades, as specified by the Society of Automotive Engineers (SAE). Alloying elements include chromium and molybdenum, and as a result these materials are often informally referred to as chromoly steel (common variant stylings include chrome-moly, CrMo, CRMO, CR-MOLY, and similar).