a441 steel yield

Uns K12211 · Uns K12810 · Tool Steel · Contact Us · Stainless Steel · Mould SteelMy copy of the AISC, 6th edition on a sheet labeled "Revised 3/66" indicates that A441-63T steel had 3 different yield strengths: Group I: Fy=50 ksi which is for all shapes except those in Groups II & III Group II: Fy=46 ksi which is for Wide Flange shapes 36x16-1/2, all weights, 33x15-3/4 all weights, 14x16 142 to 211, incl. and 12x12 120 to 190, incl. Group III: Fy=42 ksi which is for WF shapes 14x16 with weights per foot from 219 to 426, incl. I hope that this helps.Screwtape: Look a little deeper. As I recall those strengths were primarily based on material thickness in that ASTM Designation; i.e. plate thickness or in your case ASTM groups for Structural Shapes. There were four Structural Shape groups, with the heavier shapes having the lower strengths. Basically, this was due to work strengthening (hardening) caused by the added rolling required for thinner shapes, and I believe it was Fy = 50ksi min. for thicknesses up to about .75" thickness.Thanks for the info. I should have simply kept digging. The 3 sizes in question are W14x109/111, W14x68, and W14x43. Looking in AISC 7th edition, The W14x43 falls under Group I, with the W14x109 and W14x68 falling under Group II -- both of which were only available as 50 KSI steel. It's embarrassing when the answer you need is just a page turn away. :)Screwtape, That's OK, I am glad to help. I did notice that the price tag from my 6th edition is still attached to my copy. It cost a whopping $7.00 back in the mid 60's. I belive that the 13th edition's current cost is $350 (for non members).That's only a 50 times increase in 45 years.Authors: Nagaraja Rao N RAffiliation: Lehigh University