Our policy is to continuously improve and develop our products. Therefore, any photo, drawing or technical specification is indicative and may be altered without any previous notice. Material Description Stainless Steel DIN 1.4401 DIN Specifications DIN 1.4401, DIN 2463, DIN 17451 Specifications Equity AISI 316, UNS S31600
Specification Sheet: Alloy 316/316L (UNS S31600, S31603) W. Nr. 1.4401, 1.4404 An Austenitic Stainless Steel Containing Molybdenum Which is More Corrosion Resistant than the Conventional 304/304L Stainless Steel Alloy 316-316L 06/2014 SandmeyerSteel SANDMEYER STEEL COMPANY ONE SANDMEYER LANE • PHILADELPHIA, PA 19116-3598
AISI 316 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. 316 is the AISI designation for this material. S31600 is the UNS number. Additionally, the British Standard (BS) designation is 316S16.
The SAE steel grades system is a standard alloy numbering systems for steel grades maintained by SAE International. In the 1930s and 1940s the American Iron and Steel Institute (AISI) and SAE were both involved in efforts to standardize such a numbering system for steels.
AISI 316L 316 - UNS S31600 316L - UNS S31603 DESCRIPTION: 316/316L is an 18/8 austenitic stainless steel enhanced with an addition of 2.5% Molybdenum, to provide superior corrosion resistance to type 304 stainless steel. 316/316L has improved pitting corrosion resistance and has excellent resistance to sulphates, phosphates and other salts. 316
Provides AISI 316 standard specification, AISI 316 datasheet, AISI 316 chemical composition , AISI 316 mechanical properties, technical specifications of AISI 316 steel material properties. AISI 316 performance specifications. I am Joy shen,If you have any requirement for steel, please feel free to contact with me at any time.
AISI STANDARD - AISI: American Iron and Steel Institute
AISI. STANDARD. Supplement No. 2 to the North American Specification for the Design of Cold-Formed Steel Structural Members, 2007 Edition . FEBRUARY 2010 . Endorsed in Mexico by CANACERO . Canadian Standards Association . CSA S136-07/S1-10 . Approved in Canada by the . CANACERO
Stainless Steel Alloy 316/316L Specifications: UNS S31600
Alloy 316/316L is molybdenum-bearing austenitic stainless steel. The higher nickel and molybdenum content in this grade allows it to demonstrate better overall corrosion resistant properties than 304, especially with regard to pitting and crevice corrosion in chloride environments.
AISI 316Ti stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. Cited properties are appropriate for the annealed condition. 316Ti is the AISI designation for this material. AISI 316 (S31600) Stainless Steel AISI 316N (S31651) Standard Specification for Forged or Rolled Alloy and
ASTM A193 Specification covers high tensile alloy and stainless steel bolts including most popular grade B5, B6, B7, B7M, B8, B8M, B8T, B16, etc. ASTM A193 specification covers alloy and stainless steel bolting for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applications.
AISI 316 . UNS S31600 . EN 1.4401 . AISI 316L . UNS S31630 . EN 1.4404 . INTRODUCTION . NAS provids 316 eand 316L SS, which are molybdenum-bearing austenitic stainless steels. These steels contain more nickel than and 2 to 3% m304SS olybdenum. The resultant composition gives these steels improved corrosion resistance in many
Type 316 Stainless Steel is widely used in applications requiring corrosion resistance superior to Type 304, or good elevated temperature strength. Typical uses include exhaust manifolds, furnace parts, heat exchangers, jet engine parts, pharmaceutical and photographic equipment, valve and
engineer, specification writer, producer and user of STAINLESS STEEL with a listing of all the current ASTM (American Society for Testing and American Iron and Steel Institute (AISI), Washington, D.C., and was used, with thanks, as a basis for this updated handbook. The 2001 Annual Book of ASTM Standards, Sections 1 and 13 were
strength properties, the Types 316, 316L, 317 and 317L Cr-Ni-Mo alloys also provide the excellent fabricability and formability which are typical of the austenitic stainless steels. Types 316, 316L, 317 and 317L are available in the form of sheet, strip and plate to ASTM A240 and ASME SA-240 and other pertinent specifica-tions.
AISI 316 is an austentic grade second to 304 in commercial importance It has additional molybdenum which gives improved corossion resistance when exposed to chlorides, it is immune to grain bundaries carbide precipitation.
AISI 304 Stainless Steels Type Technical Specifications
316 stainless steels : 316 stainless steel have nearly all chemical specs same as of 304 stainless steels except it had Molybdenum which makes it corrosion protective in saline environments. 316 stainless steel is the closest match to 304 grade.
316 Higher corrosion resistance needed; the lower work hardening rate of 316 is acceptable Limitation of Liability The information contained in this datasheet is not an exhaustive statement of all relevant information. It is a general guide for customers to the products and services available from Atlas Steels and no representation is made or
316 Stainless Steel: This alloy is recommended for welding because it has a carbon content lower than 302 to avoid carbide precipitation in welding applications. The addition of molybdenum and a slightly higher nickel content make 316 Stainless Steel suitable for architectural applications in severe settings, from polluted marine environments
Standard Specification for Seamless, Welded, and Heavily
Abstract. This guide covers standard specification for seamless, straight-seam welded, and cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.